When the products we trust most turn dangerous, Texas law provides powerful protection for consumers—but only if you know your rights and act quickly. Every year, nearly 51,000 deaths and 28.5 million medically treated injuries occur because of faulty consumer products, according to the U.S. Consumer Product Safety Commission. If you’re dealing with injuries from a defective product, understanding Texas product liability claims can mean the difference between getting fair compensation and losing your rights forever.

Texas has some of the strongest consumer protection laws in the country. The state’s product liability system helps injured people recover damages when manufacturers put profits before safety. But here’s the catch: you only have two years to file your claim. Miss that deadline, and you lose everything.

This guide breaks down everything you need to know about filing defective product lawsuits in Texas. We’ll cover the three types of product defects, what compensation you can expect and the exact steps to protect your rights.

Understanding Texas Product Liability Law

Texas product liability law operates under a simple but powerful principle: if a product hurts you because it’s defective, the company that made or sold it should pay for your damages. This protection comes from Texas Civil Practice and Remedies Code Chapter 82, which sets the rules for how these cases work.

The best part about Texas law is that it follows what lawyers call “strict liability.” This means you don’t have to prove the manufacturer was careless or negligent. You just need to show the product was defective and that defect caused your injury. It’s a much easier standard than other types of personal injury cases.

Texas lawmakers designed these laws to balance consumer protection with fair business practices. Companies can’t hide behind excuses if their products hurt people. At the same time, the law protects businesses from frivolous lawsuits by requiring clear proof that a defect actually caused the injury.

Key Legal Definitions You Need to Know

Before diving deeper, let’s define the main players in Texas product liability claims. A “claimant” is anyone seeking compensation for losses caused by a defective product. That’s usually the injured person or their family.

A “manufacturer” includes designers, builders, producers and assemblers who put products into the marketplace. This definition is broad enough to catch everyone involved in making the product, from the company that designed it to the factory that built it.

A “seller” is any business that distributes products for commercial purposes. This includes retail stores, wholesalers and online sellers. Even if they didn’t make the product, sellers can still be held responsible in certain situations.

A “products liability action” covers any lawsuit against manufacturers or sellers seeking damages from defective products. It doesn’t matter if you base your case on strict liability, negligence, breach of warranty or any other legal theory.

Who Can Be Held Liable?

Texas law casts a wide net when determining who’s responsible for defective products. Manufacturers bear the primary responsibility since they design and build the products. But the liability chain extends much further.

Distributors and wholesalers who move products from manufacturers to stores can face lawsuits. Retail stores that sell defective products to consumers may also be liable, especially if they knew about defects or modified the product.

Component part manufacturers present interesting cases. If a car accident happens because of faulty brakes, both the brake manufacturer and the car company could be responsible. Each company in the supply chain has duties to ensure product safety.

Foreign manufacturers create special challenges. When overseas companies can’t be reached for lawsuits, Texas law allows claims against distributors and sellers. This ensures injured consumers have someone to hold accountable, even when the actual manufacturer is in another country.

Three Types of Product Defects in Texas

Texas law recognizes three distinct categories of product defects, each with different legal standards and proof requirements. Understanding which type applies to your situation is crucial for building a strong case and meeting the burden of proof required by Texas courts.

Manufacturing defects are often the easiest to prove but can be the most dangerous. These occur when something goes wrong during the production process, making the product unsafe despite having a proper design. The key is showing the defect existed when the product left the manufacturer’s control.

Design defects present more complex legal challenges. Even if a product is manufactured perfectly, the design itself might be unreasonably dangerous. These cases require proving that a safer alternative design existed and was economically and technologically feasible when the product was made.

Manufacturing Defects

Manufacturing defects happen when products are made incorrectly, creating safety hazards despite proper design. Think of contaminated medications where harmful substances accidentally get mixed in during production. Or machinery accidents where car brakes fail because a worker installed the wrong parts on the assembly line.

Electronics provide another common example. A smartphone that catches fire because of loose internal wiring has a manufacturing defect. The design might be perfectly safe, but something went wrong during assembly. These defects are particularly dangerous because consumers have no way to detect them before injury occurs.

The legal standard for manufacturing defects requires proving the defect existed when the product left the manufacturer’s control. This can be challenging if the product was destroyed in the incident. Expert testimony is usually required to reconstruct what happened and identify the specific manufacturing error.

Evidence requirements include detailed product analysis, manufacturing records and quality control data. Lawyers often hire engineers and other technical experts to examine the product and determine exactly where the manufacturing process failed. Similar incident reports can also help establish a pattern of defective products from the same production line.

Design Defects

Design defects are inherent flaws that make products unreasonably dangerous even when manufactured perfectly. SUVs with high rollover risks represent a classic example. The vehicle might be built exactly to specifications, but the design itself creates unacceptable safety hazards.

Power tools lacking proper safety guards demonstrate another type of design defect. A circular saw without blade guards might work perfectly for cutting, but the design exposes users to severe injury risks. Children’s toys with small parts that create choking hazards also fall into this category.

Legal requirements for design defect cases are more demanding than manufacturing defects. You must prove a safer alternative design existed and was economically and technologically feasible when the product was made. This means showing the manufacturer could have built a safer product without significantly increasing costs or reducing functionality.

The burden of proof is higher because design defect cases essentially argue the entire product line is flawed. Courts want clear evidence that manufacturers had realistic options for making safer products but chose not to implement them. This often requires extensive expert testimony comparing the actual design with proposed alternatives.

Marketing Defects (Failure to Warn)

Marketing defects occur when products lack adequate warnings or instructions about known risks. Even if a product is well-designed and manufactured correctly, companies must warn consumers about dangers that aren’t obvious. This duty extends beyond just slapping warning labels on products.

Manufacturers must provide warnings for unexpected dangers that consumers wouldn’t reasonably anticipate. Birth control drugs that cause serious medical problems require detailed warnings about side effects. Furniture that needs specific installation to prevent tip-overs must include clear assembly instructions and safety warnings.

The manufacturer’s duties include providing adequate warnings, proper usage instructions and guidance about misuse risks. Companies can’t just assume consumers will figure out how to use products safely. They must actively educate users about potential hazards and safe operating procedures.

Examples of failure to warn cases include power tools without safety operation guides, household chemicals missing toxicity warnings and medical devices lacking proper usage instructions. These cases often involve products that are inherently dangerous but can be used safely when consumers receive adequate information.

Your Rights Under Texas Product Liability Law

Texas product liability law provides comprehensive protection for consumers injured by defective products. The state’s legal framework ensures that manufacturers and sellers bear financial responsibility for the harm their products cause, giving injured parties multiple avenues for recovery.

Understanding what types of compensation are available helps set realistic expectations for your case. Texas allows recovery of economic damages, non-economic damages and in extreme cases, punitive damages. Each category addresses different aspects of the losses you’ve suffered.

The compensation system is designed to make you whole again, restoring you to the financial and personal position you would have been in without the defective product injury. While money can’t undo physical harm, proper compensation helps cover the costs and impacts of your injuries.

What You Can Recover

Economic damages represent the tangible financial losses from your defective product injury. Medical expenses form the largest category, covering all costs related to treating your injuries. This includes emergency room visits, surgeries, medications, physical therapy and future medical care related to your injuries.

Lost wages and reduced earning capacity compensation addresses income losses from your injury. If you missed work during recovery, you can recover those lost wages. More importantly, if your injuries permanently affect your ability to earn money, you can recover compensation for that future income loss.

Property damage covers harm to your personal belongings or real estate caused by the defective product. Texas allows full recovery of properly documented economic damages without statutory caps, making thorough documentation essential for maximizing this portion of your settlement.

Non-economic damages address the intangible impacts that significantly affect your quality of life. Pain and suffering compensation covers physical discomfort and ongoing pain from your injuries. Emotional distress addresses psychological impacts like anxiety, depression and trauma from the incident.

Loss of enjoyment of life compensation recognizes that injuries often prevent you from participating in activities and experiences you previously enjoyed. Disfigurement compensation addresses permanent scarring or visible changes to your appearance. Loss of consortium covers impacts on relationships with your spouse.

Punitive damages are available in extreme cases involving manufacturer misconduct. These damages punish companies for particularly reckless behavior and deter similar conduct. However, punitive damages are capped in Texas at the greater of $200,000 or two times economic damages plus non-economic damages up to $750,000.

Settlement Ranges and Expectations

Product liability settlements vary dramatically based on case-specific factors. While some reports suggest average settlements fall between $30,000 and $100,000, these ranges can be misleading without context. The reality is that product liability awards tend to be much higher than typical personal injury cases.

The median product liability award is $748,000, compared to just $16,000 for car accident cases. This dramatic difference reflects the serious nature of product defect injuries and the substantial resources required to prove these complex cases.

Several factors affect compensation amounts. Severity of injuries plays the biggest role, with permanent disabilities and disfiguring injuries typically resulting in much higher awards. Clear evidence of product defects strengthens your negotiating position and increases settlement values.

Manufacturer conduct also influences compensation. Companies that knew about defects but failed to warn consumers or issue recalls often face higher damages. Available insurance coverage affects settlement negotiations, as manufacturers with more insurance can typically pay larger settlements.

Filing a Product Liability Claim in Texas: Step-by-Step Guide

Filing Texas manufacturing defect claims requires careful preparation and attention to legal deadlines. The process involves multiple steps, each crucial for building a strong case and maximizing your compensation. Missing any step can seriously damage your chances of recovery.

The key to successful product liability claims is acting quickly and preserving evidence. Unlike motor vehicle accidents where fault is often clear, product defect cases require extensive investigation to prove the product was defective and caused your injuries. This investigation takes time, making early action essential.

Working with experienced product liability attorneys becomes critical because of the complex technical and legal issues involved. These cases often require expert witnesses, product testing and extensive discovery to build compelling arguments for defective product liability.

Immediate Steps After Product-Related Injury

Your first priority after any product-related injury should be seeking immediate medical attention. Don’t try to tough it out or assume injuries are minor. Some product-related injuries, especially those involving chemicals or electrical devices, can have delayed symptoms that worsen over time.

Document all your injuries thoroughly during medical treatment. Take photos of visible injuries and keep detailed records of all symptoms and treatments. Follow all medical recommendations, even if they seem excessive. Insurance companies and defense lawyers will use any gaps in medical treatment to argue your injuries aren’t serious.

Keep all medical records organized and accessible. These documents form the foundation of your economic damages claim and provide crucial evidence linking your injuries to the defective product. Request copies of all medical records, test results and imaging studies related to your treatment.

Preserving the defective product and related evidence is equally important. Don’t throw away the product, even if it’s severely damaged. Defense lawyers and expert witnesses need to examine the actual product to understand what went wrong and whether defects caused your injury.

Take photographs of the product from multiple angles, including close-ups of any visible defects or damage. Photograph the accident scene if the injury occurred at a specific location. Preserve all packaging, instructions and warranty information that came with the product.

Document the accident scene thoroughly. If other people witnessed the incident, get their contact information immediately. Witnesses often forget important details over time, making early documentation crucial for preserving their testimony.

Legal Requirements to Prove Your Case

Texas product liability law requires proving four essential elements to win your case. First, you must show the product was defective and unreasonably dangerous when it left the manufacturer’s control. This means identifying the specific defect and proving it existed before you used the product.

Second, the defect must have directly caused your injury or harm. This causation requirement can be challenging, especially if multiple factors contributed to your accident. Expert witnesses often provide crucial testimony linking the product defect to your specific injuries.

Third, you must show the product was being used as intended or in a reasonably foreseeable manner. Manufacturers can’t be held responsible for injuries caused by obvious misuse or extremely unusual applications of their products.

Fourth, the defect must have existed when the product left the manufacturer’s control. This prevents manufacturers from being blamed for damage or modifications that occurred after sale. It also requires careful analysis of the product’s history from manufacture to injury.

Evidence you’ll need includes expert testimony for complex defects. Engineers, doctors and other technical experts help explain how defects caused injuries and why safer alternatives were available. These witnesses are expensive but often essential for winning complex product liability cases.

Medical records linking your injuries to the product provide crucial causation evidence. Detailed documentation of your symptoms, treatment and prognosis helps establish the extent of damages and the connection to the defective product.

Understanding Texas’s Strict Liability Standard

Texas follows a strict liability standard for product liability cases, which makes these cases easier to win than traditional negligence claims. Under strict liability, you don’t need to prove the manufacturer was careless or acted unreasonably. You only need to prove the product was defective and caused your injury.

This legal standard focuses on the product’s condition rather than the manufacturer’s behavior. Even if the company followed industry standards and used reasonable care, they can still be held liable if their product was defective and caused harm.

However, Texas does apply a modified comparative fault rule that can reduce your compensation. If you were partially responsible for your injury, your damages will be reduced by your percentage of fault. If you’re found to be 51% or more at fault, you can’t recover any compensation.

This fault-sharing system means your own actions matter in product liability cases. Using a product in an obviously dangerous way or ignoring clear safety warnings can significantly impact your case. Defense lawyers will scrutinize your behavior to find ways to shift blame away from the defective product.

Critical Time Limits and Deadlines

Time limits represent one of the most crucial aspects of Texas product liability claims. The state’s statute of limitations creates hard deadlines that can permanently bar your right to seek compensation. Understanding these deadlines and acting within them is absolutely essential for protecting your legal rights.

Missing the statute of limitations is one of the most common ways people lose their right to compensation. Even if you have a strong case with clear evidence of defects and serious injuries, waiting too long to file your lawsuit will result in automatic dismissal of your case.

The urgency of these deadlines can’t be overstated. Product liability cases require extensive investigation, expert analysis and legal preparation. Starting this process early gives your legal team the best chance to build a compelling case and negotiate favorable settlements.

Texas Statute of Limitations

The basic rule for Texas product liability claims is straightforward: you have two years from the date of your injury to file a lawsuit. This deadline applies to most product liability cases and begins running from the day you were actually injured, not when you discovered the product was defective.

However, Texas law includes a discovery rule that can extend this deadline in certain situations. If you couldn’t reasonably have discovered your injury immediately, the two-year clock starts ticking when you discover or should have discovered the injury. This most commonly applies to cases involving toxic exposure or delayed-onset medical conditions.

For minors, special rules apply that can significantly extend filing deadlines. The statute of limitations typically doesn’t begin running until the injured person reaches 18 years of age. This means a child injured by a defective product at age 10 would have until age 20 to file a lawsuit.

Parents can file lawsuits on behalf of minor children, but the child retains the right to file their own lawsuit after reaching adulthood. This dual protection ensures children don’t lose their rights because of parental inaction while also allowing immediate legal action when appropriate.

Why Acting Quickly Matters

Waiting too long to pursue your Texas design defect liability claim creates problems that extend far beyond legal deadlines. Evidence deteriorates over time, making it harder to prove your case. Products get thrown away, accident scenes change and crucial evidence disappears.

Witness memories fade with time, reducing the reliability and impact of their testimony. People forget important details about what they saw, heard or experienced. Early witness interviews capture fresh, detailed accounts that become invaluable during negotiations and trial.

Your own memory of events becomes less reliable over time. The trauma and stress of serious injuries can affect memory formation and recall. Documenting your experience soon after the incident ensures important details aren’t lost or distorted by time.

Weakened bargaining power represents another consequence of delay. Insurance companies and defense lawyers know that people approaching statute of limitations deadlines feel pressured to accept low settlement offers rather than risk losing everything. Starting early gives you more negotiating leverage and time to properly value your case.

Exceptions and Extensions

Fraudulent concealment by manufacturers can extend the statute of limitations beyond the normal two-year deadline. If a company actively hides defects or lies about product safety, the clock may not start running until you discover the truth about the defective product.

Discovery of latent injuries or illnesses can also trigger extended deadlines. Some product-related injuries don’t become apparent for months or years after exposure. Asbestos-related diseases, chemical poisoning and certain pharmaceutical side effects often fall into this category.

The continuing treatment doctrine may extend deadlines in cases involving ongoing medical care. If you’re receiving continuous treatment for product-related injuries from the same healthcare provider, the statute of limitations may not begin running until treatment ends.

If you’re approaching any deadline, consult with a product liability attorney Texas immediately. Even if you think you’ve missed the deadline, attorneys can evaluate whether exceptions or extensions might apply to your situation. Don’t assume your case is hopeless without getting professional legal advice.

Special Considerations for Different Products

Different types of products present unique legal challenges and opportunities in Texas product liability claims. The complexity of modern products means that specialized knowledge is often required to identify defects, establish causation and prove damages effectively.

Understanding industry-specific issues helps set realistic expectations about case timelines, evidence requirements and potential outcomes. Some product categories have federal regulations that affect liability standards, while others involve complex technical issues that require extensive expert testimony.

These variations underscore the importance of working with attorneys who have specific experience in your type of product liability case. Generic personal injury lawyers may miss crucial industry-specific issues that could make or break your case.

Pharmaceutical and Medical Device Claims

Pharmaceutical and medical device cases present some of the most complex challenges in product liability law. The Food and Drug Administration approval process creates a rebuttable presumption that properly approved drugs and devices aren’t defective, making these cases more difficult to prove.

However, manufacturers can still be held liable if they withheld information from the FDA, misrepresented safety data or promoted unapproved uses for their products. Recent cases involving opioid manufacturers and defective medical implants demonstrate that FDA approval doesn’t provide complete immunity from liability.

Complex causation issues often arise because patients typically have underlying medical conditions that could explain their symptoms. Proving that a drug or device caused specific injuries requires extensive medical expert testimony and careful analysis of medical records.

Mass tort potential exists for many pharmaceutical and medical device cases. When products injure large numbers of people, cases may be consolidated into multidistrict litigation or class action lawsuits. These consolidated proceedings can provide efficiency benefits but may also reduce individual attention to your specific case.

Vehicle and Automotive Product Claims

Vehicle and automotive product liability cases represent the most common type of product liability claims in Texas. Modern vehicles contain thousands of components from hundreds of different manufacturers, creating complex webs of potential liability when defects cause accidents.

Multiple potential defendants often exist in automotive cases. If a brake failure causes an accident, liability might extend to the brake manufacturer, brake fluid supplier, vehicle manufacturer and parts distributor. Each defendant may try to shift blame to others, making these cases legally complex.

Federal safety standards compliance issues frequently arise in automotive cases. Manufacturers often argue that compliance with federal safety standards shields them from liability. However, Texas law allows plaintiffs to overcome this presumption by showing that compliance doesn’t eliminate the unreasonable danger.

Recall and technical service bulletin evidence can provide powerful support for defective product claims. These documents often acknowledge safety problems and provide roadmaps for proving defects. However, manufacturers typically argue that recalls demonstrate responsible behavior rather than admission of liability.

Consumer Products and Appliances

Consumer products and appliances encompass a vast range of household items that can cause serious injuries when defective. These cases often involve products that consumers use daily without thinking about potential dangers.

Children’s products face heightened safety standards because of the vulnerable population they serve. Toys, cribs, high chairs and other children’s products must meet strict federal and state safety requirements established by the Consumer Product Safety Commission. Violations of these standards can provide strong evidence of defectiveness.

Electronic device failures and fires present growing areas of concern as homes become filled with sophisticated electronic products. Lithium battery fires, electrical malfunctions and software defects can cause serious property damage and personal injuries.

Furniture tip-over cases have gained increased attention as heavy televisions and furniture cause deaths and injuries, particularly to children. These cases often involve design defects related to stability and marketing defects related to inadequate warnings about tip-over risks.

Working with a Texas Product Liability Attorney

The complexity of Texas Civil Practice and Remedies Code 82 and modern product liability cases makes professional legal representation essential for most claims. These cases involve technical issues, complex legal standards and well-funded defense teams that individual consumers can’t match on their own.

Product liability cases require substantial financial resources for expert witnesses, product testing and extensive discovery. Most individual consumers lack the resources to properly investigate and prove complex product defect claims without professional help.

The stakes in product liability cases are often much higher than typical personal injury claims, making the investment in quality legal representation worthwhile. The difference between having experienced counsel and representing yourself can easily amount to hundreds of thousands of dollars in additional compensation.

Why Legal Representation is Essential

High standards for proving defects exist and require specialized knowledge and experience. Engineers, doctors and other technical experts must analyze products and explain complex defect theories to judges and juries. Coordinating these expert witnesses and presenting their testimony effectively requires legal expertise.

Extensive financial resources are needed for expert witnesses and product testing. Product liability experts often charge thousands of dollars for their analysis and testimony. Product testing by independent laboratories can cost tens of thousands of dollars. Most individuals can’t afford these expenses upfront.

Complex federal and state regulations govern different types of products. Pharmaceuticals, medical devices, automobiles and other products are subject to detailed regulatory requirements that affect liability standards. Understanding how these regulations interact with state product liability law requires specialized knowledge.

Suing foreign manufacturers presents unique challenges and expenses. Many consumer products are manufactured overseas by companies with limited presence in the United States. Serving legal papers, conducting discovery and enforcing judgments against foreign companies requires international legal expertise.

What to Look for in an Attorney

Experience with similar product defect cases should be your first consideration when choosing legal representation. Attorneys who have handled cases involving your type of product understand the technical issues, regulatory requirements and common defense strategies you’ll face.

Resources for expert witnesses and product testing distinguish top-tier product liability firms from general practice lawyers. Established firms have relationships with the best expert witnesses and access to testing facilities needed for complex cases.

Track record of substantial settlements and verdicts demonstrates an attorney’s ability to maximize compensation for clients. Look for specific examples of product liability cases similar to yours and the results achieved for those clients.

Understanding of Texas Civil Practice and Remedies Code Chapter 82 ensures your attorney can navigate state-specific requirements and take advantage of favorable Texas law. Product liability law varies significantly between states, making local expertise crucial.

The Legal Process Timeline

Initial case evaluation and investigation typically takes several weeks or months depending on case complexity. Attorneys must analyze the product, review medical records, consult with experts and determine the strength of potential claims before filing lawsuits.

Filing the lawsuit within the statute of limitations deadline starts the formal legal process. Your attorney will prepare detailed complaints identifying all potential defendants and legal theories supporting your claims.

The discovery phase involves exchanging information and taking depositions of witnesses and experts. This phase often takes six months to two years depending on case complexity and the number of parties involved.

Settlement negotiations can occur at any point during the legal process. Many product liability cases resolve through negotiated settlements rather than trials. Your attorney should keep you informed about settlement offers and provide advice about whether to accept or reject proposed agreements.

Trial preparation becomes necessary if settlement negotiations fail. Preparing for trial in complex product liability cases can take many months and require extensive coordination of expert witnesses and demonstrative evidence.

Most cases resolve through negotiation rather than trial. Statistics show that more than 90% of product liability cases settle before trial. However, the threat of trial gives plaintiffs leverage in settlement negotiations and helps ensure fair compensation offers.

Frequently Asked Questions

How long do I have to file a product liability claim in Texas?

You have two years from the date of injury to file a Texas product liability claim. The discovery rule may extend this deadline if you couldn’t reasonably have discovered the injury immediately. For minors, the clock typically doesn’t start until they reach age 18.

Do I need to prove the manufacturer was negligent in Texas product liability cases?

No, Texas follows strict liability for product defect cases. You only need to prove the product was defective and caused your injury. You don’t have to show the manufacturer was careless or negligent in designing or manufacturing the product.

Can I still recover compensation if I was partially at fault for my injury?

Yes, but your compensation will be reduced by your percentage of fault under Texas’s comparative negligence rules. However, you cannot recover any compensation if you’re found to be 51% or more responsible for your own injury.

What if the manufacturer is located outside the United States?

You may still be able to pursue claims against sellers and distributors when foreign manufacturers are unreachable. Texas law allows claims against domestic companies in the distribution chain when overseas manufacturers cannot be served with legal papers or lack sufficient assets.

How much does it cost to hire a product liability attorney in Texas?

Most product liability attorneys work on contingency fee arrangements, meaning you pay no attorney fees unless you recover compensation. The attorney’s fee is typically a percentage of any settlement or judgment, usually ranging from 33% to 40% depending on case complexity.

Taking Action to Protect Your Rights

Texas product liability claims offer powerful protection for consumers harmed by defective products, but these rights come with strict deadlines and complex legal requirements. Understanding the three types of defects, compensation available and filing procedures gives you the foundation needed to pursue fair recovery.

The most important thing to remember is that time matters in product liability cases. The two-year statute of limitations creates hard deadlines that can’t be ignored. Evidence deteriorates, witnesses forget details and your legal position weakens with delay.

If you’ve been injured by a defective product, take immediate action to preserve your rights. Seek medical attention, preserve the product and evidence, and consult with experienced legal counsel as quickly as possible. These steps protect your ability to recover compensation and hold manufacturers accountable for dangerous products.

The future of product liability law continues to involve as technology advances and new products enter the marketplace. Artificial intelligence, autonomous vehicles and smart home devices will create new categories of product defect cases. But the fundamental principle remains the same: companies that profit from selling products must be responsible when those products cause harm.

Don’t let defective products rob you of your future. The experienced team at Kelley Wolff Injury Attorneys understands the complexities of Texas product liability law and has the resources needed to take on major manufacturers. We’ve recovered millions for clients harmed by dangerous products and we’re ready to fight for your rights.

Get in Touch with Our Austin Personal Injury Team today for a free consultation. Your rights are too important to wait, and every day you delay weakens your case. Call now to protect your future and hold negligent manufacturers accountable.